{"product_id":"22-5w-fast-charging-power-bank-diy-kit-1260110-battery-case-power-bank-type-c-supports-pd-qc-vooc-20000mah-power-bank-case","title":"Aideepen 22.5W DIY power bank kit - 3 variants","description":"\u003cp\u003e\u003cstrong\u003eAideepen 22.5W DIY power bank kit\u003c\/strong\u003e provides a digital-display charging module for building your own portable charger. Choose a white case kit, a black case kit, or the module-only option for your own project. Assembly and soldering are required; batteries are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMaximum advertised charging output: 22.5W with a compatible charging protocol, device, cable, and battery setup.\u003c\/p\u003e\u003cp\u003eUSB-C bidirectional charging: up to 20W PD.\u003c\/p\u003e\u003cp\u003eConnections: one USB-C input\/output port, two USB-A output ports, and a Micro USB input.\u003c\/p\u003e\u003cp\u003eDigital battery-percentage display.\u003c\/p\u003e\u003cp\u003eCharging controller: IP5356.\u003c\/p\u003e\u003cp\u003eSimultaneous output from multiple ports does not support fast charging.\u003c\/p\u003e\u003cp\u003eSupplier-listed protection functions: overcharge, over-discharge, overvoltage, and overheating protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBattery requirements:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe case accommodates two compatible 3.7V 1260110 lithium-polymer cells. Batteries are sold separately, and actual capacity depends on the cells installed.\u003c\/p\u003e\u003cp\u003eLithium iron phosphate batteries are not compatible.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCase exterior: approximately 145 × 67.5 × 27.5 mm.\u003c\/p\u003e\u003cp\u003eInternal battery installation space: approximately 110 × 60 × 23 mm.\u003c\/p\u003e\u003cp\u003eMainboard: approximately 56.5 × 23.7 × 13.7 mm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTechnical data:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMicro USB input: 5V\/2A, 9V\/2A, or 12V\/1.5A.\u003c\/p\u003e\u003cp\u003eUSB-C input: 5V\/3A, 9V\/2A, or 12V\/1.5A.\u003c\/p\u003e\u003cp\u003eUSB-C output: 5V\/3A, 9V\/2.2A, or 12V\/1.6A.\u003c\/p\u003e\u003cp\u003eFast-charging performance depends on the charging protocol supported by the connected equipment. Not every device supports the advertised maximum output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAvailable variants and package contents:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhite Kit: white case, charging module, USB-A to USB-C cable, connection wires, button, screws, and assembly pads\/strips shown in the product photos.\u003c\/p\u003e\u003cp\u003eBlack Kit: black case with the same kit components as the White Kit.\u003c\/p\u003e\u003cp\u003eOnly Module: one charging module and two connection wires. Case and USB cable are not included with this option.\u003c\/p\u003e\u003cp\u003eBatteries are not included with any variant. Assembled-product photos illustrate the finished result.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAssembly requirements:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is an electronics assembly kit, not a ready-to-use power bank. Installation requires experience with lithium-battery electronics and soldering.\u003c\/p\u003e\u003cp\u003eFollow the supplier's assembly instructions, observe the marked battery polarity, and use the specified parallel battery configuration, never a series connection. Incorrect wiring or inadequate insulation can damage the circuit and create a safety hazard.\u003c\/p\u003e\u003cp\u003eTest the module and all charging functions before closing the snap-fit case. The case is not intended for repeated disassembly.\u003c\/p\u003e","brand":"somai.store","offers":[{"title":"White Kit","offer_id":55441220567378,"sku":"14:10#White Kit","price":13.67,"currency_code":"USD","in_stock":true},{"title":"Black Kit","offer_id":55441220600146,"sku":"14:1202#Black Kit","price":13.67,"currency_code":"USD","in_stock":true},{"title":"Only Module","offer_id":55441220632914,"sku":"14:94#Only Module","price":10.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1040\/4095\/6242\/files\/S23281585d86a49b8a48af51d346fb509j.webp?v=1794573055","url":"https:\/\/somai.store\/sv\/products\/22-5w-fast-charging-power-bank-diy-kit-1260110-battery-case-power-bank-type-c-supports-pd-qc-vooc-20000mah-power-bank-case","provider":"somai.store","version":"1.0","type":"link"}